keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A810/1610/2410 Advanced Analog Interface Card

A2410P don'T detect installed module

11 years 7 months ago #8239 by mtaller
Hi all

I have a ELX3000 (Elastix appliance) with a A2410P with 6 FXO modules installed (installed by Elastix staff)
In web interface, when I use "Hardware detector" menu. There are nothing.

In /var/log/message, I have this :
Jul 31 11:14:04 elastix kernel: dahdi: Version: 2.6.1
Jul 31 11:14:05 elastix kernel: OpenVox A2410P version: 1.4
Jul 31 11:14:07 elastix kernel: Module 0: Not installed
........
Jul 31 11:14:07 elastix kernel: Module 23: Not installed
Jul 31 11:14:07 elastix kernel: dahdi: disable_span: span 1
Jul 31 11:14:07 elastix kernel: opvxa24xx: probe of 0000:05:00.0 failed with error -5


I have try to reinstall drivers ( http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/releases/1.3.5/openvox_dahdi-linux-complete-2.6.1+2.6.1.tar.gz ), but nothing change.

Someone have an idea ?
Thanks you
11 years 7 months ago #8240 by hua
Hello

First please make sure you have supplied power to A2410. If still not works,re-insert the card to PCI slot again or change another PCI slot.
Have a try. You can contact me by MSN This email address is being protected from spambots. You need JavaScript enabled to view it. or Skype upper.hua

Best regards
upper.hua
11 years 7 months ago #8242 by mtaller
Power cable is connected
I have try all PCI slot (the board have 2 PCI)
Removed second PCI card (a network adapter)

still nothing
11 years 7 months ago #8243 by hua
Hello

Please send E-mail about the SSH information to This email address is being protected from spambots. You need JavaScript enabled to view it. .Let me check it .

upper.hua
11 years 7 months ago #8244 by mtaller
ok, I'm not at my office right now and the Elastix was currently not connect to the network.
I will send you information in the next 12 hours.
Time to create page: 0.038 seconds
Powered by Kunena Forum