keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A810/1610/2410 Advanced Analog Interface Card

Modprobe AE2410P Error

13 years 6 months ago #6299 by jacklee1020
Hi,

I have problem with AE2410P , Can you help me?
Thanks.


[root@cp-ipcc tools]# make config
CC="" CXX="g++" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" makeopts
make[1]: Entering directory `/root/dahdi-linux-complete-2.2.0.2+2.2.0/tools/menuselect'
make[1]: `makeopts' is up to date.
make[1]: Leaving directory `/root/dahdi-linux-complete-2.2.0.2+2.2.0/tools/menuselect'
install -D dahdi.init /etc/rc.d/init.d/dahdi
install -D ifup-hdlc /etc/sysconfig/network-scripts/ifup-hdlc
/sbin/chkconfig --add dahdi
DAHDI has been configured.
List of detected DAHDI devices:
pci:0000:03:0d.0 opvxa24xx- 1b74:2410 OpenVox A2410P
run 'dahdi_genconf modules' to load support for only
the DAHDI hardware installed in this system. By
default support for all DAHDI hardware is loaded at
DAHDI start.
[root@cp-ipcc tools]#
[root@cp-ipcc tools]# modprobe dahdi
[root@cp-ipcc tools]# modprobe opvxa24xx opermode=CHINA
FATAL: Error inserting opvxa24xx (/lib/modules/2.6.30/dahdi/opvxa24xx/opvxa24xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[root@cp-ipcc tools]# dmesg
opvxa24xx: Unknown symbol dma_alloc_coherent
opvxa24xx: Unknown symbol dma_alloc_coherent

dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
opvxa24xx: Unknown symbol dma_alloc_coherent
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new interface driver xpp_usb
dahdi: Registered tone zone 0 (United States / North America)
dir used greatest stack depth: 2032 bytes left
opvxa24xx: Unknown symbol dma_alloc_coherent
opvxa24xx: Unknown symbol dma_alloc_coherent
[root@cp-ipcc tools]#
13 years 6 months ago #6300 by Denins.Den
What version of linux did you use? Did you recompile the linux kernel by yourself?
13 years 6 months ago #6301 by jacklee1020
Hi,

Thanks for you reply.

OS : CentOS
Kernel : 2.6.30
Dahdi : dahdi-linux-complete-2.2.0.2+2.2.0.tar.gz ( download from openvox )


I have follow document ( 'A2410P_AE2410P_dahdi_User_Manual_English.pdf' ) installed.
I use other openvox card is OK. Only AE2410P have probelm.

==============================================================================
[root@cp-ipcc tools]# modprobe opvxa24xx opermode=CHINA
FATAL: Error inserting opvxa24xx (/lib/modules/2.6.30/dahdi/opvxa24xx/opvxa24xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[root@cp-ipcc tools]# dmesg
opvxa24xx: Unknown symbol dma_alloc_coherent
opvxa24xx: Unknown symbol dma_alloc_coherent
===============================================================================
13 years 6 months ago #6302 by Denins.Den
The newest centos 5.5's kernel is 2.6.18-194.3.1.el5, so you recompile the kernel to 2.6.30, all right?
It's a problem of linux kernel version. Please don't recompile the kernel to test.
13 years 6 months ago #6303 by jacklee1020
Hi dennis,

Yes, I have recompole the kernel to 2.6.30 .
I will change kernel version to 2.6.18-194.3.1.el5.
Thanks for you answer.
13 years 6 months ago #6307 by jacklee1020
Hi,

Changed kernel form x86_32 to x86_64, everything is OK.
Time to create page: 0.044 seconds
Powered by Kunena Forum