1.Please make sure that the versions of your cards have the function of timing cable, the versions of the following card have this function: versions1.2 and above of A800P/A1200P, versions1.1 and above of A400E, version1.2 and above of D115E D210E D410E, version1.4 and above of D110P/D110E.
If using timing cable with D110P/D110E, adjust jumper P7 to Closed status(PLL), and connect two card by timing cable. Make sure the cable connecting Input on first card and Output on second card; Otherwise, Use default setting(Open status(CRY)).
If using timing cable with A1200P/A800P/A400E, adjust jumper P7 to Closed status(PLL), and connect two card by timing cable. Make sure the cable connecting Input on first card and Output on second card;Otherwise, Use default setting(Open status(CRY)).
If using timing cable with D410E/D210E/DE115E, adjust jumper J916 to Closed status(PLL), and connect two card by timing cable. Make sure the cable connecting Input on first card and Output on second card; Otherwise, Use default setting(Open status(CRY)).
2.Please Connect the J914 and the J915 interface with the Synchronization Cable. And the cards we use in Picture 1 are A800P ver 1.2 and D410E ver1.2.
3.The installing and configuring are just the same with the common cards. Picture 2 shows how the Synchronization Cable connect the two cards under working condition.
4.Please edit the configure files as followings:
zaptel.conf
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3,crc4
# termtype: te
bchan=32-46,48-62
dchan=47
# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
span=3,3,0,ccs,hdb3,crc4
# termtype: te
bchan=63-77,79-93
dchan=78
# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
span=4,4,0,ccs,hdb3,crc4
# termtype: te
bchan=94-108,110-124
dchan=109
# Span 5: OPVXA1200/0 "OpenVox A1200P/A800P Board 1"
fxsks=125
fxsks=126
fxsks=127
fxsks=128
fxsks=129
fxsks=130
fxsks=131
fxsks=132
zapata-channels.conf
; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-zaptel
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
group=0,12
context=from-zaptel
switchtype = euroisdn
signalling = pri_cpe
channel => 32-46,48-62
; Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
group=0,13
context=from-zaptel
switchtype = euroisdn
signalling = pri_cpe
channel => 63-77,79-93
; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
group=0,14
context=from-zaptel
switchtype = euroisdn
signalling = pri_cpe
channel => 94-108,110-124
; Span 5: OPVXA1200/0 "OpenVox A1200P/A800P Board 1"
;;; line="125 OPVXA1200/0/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 125
;;; line="126 OPVXA1200/0/1"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 126
;;; line="127 OPVXA1200/0/2"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 127
;;; line="128 OPVXA1200/0/3"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 128
;;; line="129 OPVXA1200/0/4"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 129
;;; line="130 OPVXA1200/0/5"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 130
;;; line="131 OPVXA1200/0/6"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 131
;;; line="132 OPVXA1200/0/7"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 132
Attachment
Picture 1.jpg:
[attach]123[/attach]
Picture 2.jpg:
[attach]124[/attach]