keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A-100P One Port Analog Interface Card

请问A100P默认接收FSK制式来显的默认配置是什么样的?

14 years 9 months ago #3348 by burn
我A400P的编译没敢乱动,另外上了片A100P在做测试,买了一个DTMF→FSK的来电制式转换器,结果还是收不到,按理板卡应该默认支持美标FSK的吧?
请教一下到底有什么办法可以收到来电显示? :Q
14 years 9 months ago #3349 by burn
传上我A100P卡前面接DTMF->FSK制式转换器后录音文件,请管理员帮我分析到底问题出在哪儿? 多谢了
Attachments:
14 years 9 months ago #3359 by miaolin
这个转换器好像没工作。asterisk收fsk不需要再驱动里面特别设置,在zapata.conf中,设置cidstart=ring, cidsignalling=v23或bell就应该可以
14 years 9 months ago #3365 by burn
谢谢楼上的热心帮助
我特地换了老版本的Asterisk 1.4.19来试试,提示很奇怪啊 Caller*ID failed checksum
不知道是不是我这信号质量太差? (声音听着还算正常,没啥杂音啊)

localhost*CLI>
-- Starting simple switch on 'Zap/1-1'
[Jun 10 03:00:22] ERROR[3142]: callerid.c:564 callerid_feed: fsk_serie made mylen < 0 (-1)
[Jun 10 03:00:22] WARNING[3142]: chan_zap.c:6438 ss_thread: CallerID feed failed: Success
[Jun 10 03:00:22] WARNING[3142]: chan_zap.c:6538 ss_thread: CallerID returned with error on channel 'Zap/1-1'
-- Executing [s@trunk_376:1] NoOp("Zap/1-1", "Incoming-s. CallerID:"" <> - Calling:s") in new stack
-- Executing [s@trunk_376:2] AGI("Zap/1-1", "incoming.php|answered=s&channel=376&rule=2&uniqueid=1244574022.7") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/incoming.php
-- AGI Script incoming.php completed, returning 0
== Auto fallthrough, channel 'Zap/1-1' status is 'UNKNOWN'
-- Hungup 'Zap/1-1'
-- Starting simple switch on 'Zap/1-1'
[Jun 10 03:00:27] NOTICE[3146]: callerid.c:613 callerid_feed: Caller*ID failed checksum
[Jun 10 03:00:30] NOTICE[3146]: chan_zap.c:6398 ss_thread: Got event 18 (Ring Begin)...
[Jun 10 03:00:31] NOTICE[3146]: chan_zap.c:6398 ss_thread: Got event 2 (Ring/Answered)...
14 years 9 months ago #3366 by burn
添加cidstart=ring, cidsignalling=bell 后变成这个了 :Q
[Jun 10 03:16:15] ERROR[6282]: callerid.c:564 callerid_feed: fsk_serie made mylen < 0 (-1)
[Jun 10 03:16:15] WARNING[6282]: chan_zap.c:6438 ss_thread: CallerID feed failed: Success
[Jun 10 03:16:15] WARNING[6282]: chan_zap.c:6538 ss_thread: CallerID returned with error on channel 'Zap/1-1'
14 years 9 months ago #3367 by miaolin
问题是你的cid是dtmf,用fsk检测当然不行
Time to create page: 0.045 seconds
Powered by Kunena Forum