× Questions about B100/200/400/800 ISDN BRI Cards

B100E and Fastweb

4 years 1 month ago #9049 by @ruio
Hi!
I can't get a B100E work with my ISDN BRI. I can't understand if it's my fault, but i can't make any call, any idea?


[Aug 29 17:57:34] WARNING[19518]: chan_dahdi.c:5218 dahdi_confmute: DAHDI confmute(0) failed on channel 1: Invalid argument -- Couldn't call DAHDI/g11/0532208XXX
[Aug 29 17:57:34] WARNING[19518]: chan_dahdi.c:5218 dahdi_confmute: DAHDI confmute(0) failed on channel 1: Invalid argument
[Aug 29 17:57:34] WARNING[19518]: chan_dahdi.c:5161 restore_gains: Unable to restore gains: Invalid argument
[Aug 29 17:57:34] WARNING[19518]: chan_dahdi.c:4832 reset_conf: Failed to reset conferencing on channel 1: Invalid argument


software version
asterisk 1.8
dahdi-linux-complete-2.7.0+2.7.0 from openvox
libpri 1.4.14


service dahdi restart
Loading DAHDI hardware modules:
zaphfc: [ OK ]

Running dahdi_cfg: [ OK ]

/etc/dahdi/modules
zaphfc

/etc/dahdi/system.conf
# Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER) AMI/CCS
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2

# Global data
loadzone = it
defaultzone = it

dahdi_hardware
pci:0000:03:00.0 zaphfc+ 1397:2bd0 HFC-S ISDN BRI card

dahdi_scan
dahdi_scan
[1]
active=yes
alarms=OK
description=HFC-S PCI A ISDN card 0 [TE]
name=ZTHFC1
manufacturer=Cologne Chips
devicetype=HFC-S PCI-A ISDN
location=PCI Bus 03 Slot 01
basechan=1
totchans=3
irq=0
type=digital-TE
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI
framing_opts=CCS
coding=AMI
framing=CCS

lsdahdi
### Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER) AMI/CCS
1 BRI Clear (In use) (EC: MG2 - INACTIVE)
2 BRI Clear (In use) (EC: MG2 - INACTIVE)
3 BRI Hardware-assisted HDLC (In use)

/etc/asterisk/dahdi_conf
[channels]
language=it
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes

/etc/asterisk/dahdi-channels.conf
; Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER) AMI/CCS
group=11
context=FromISDN
overlapdial=yes
switchtype = euroisdn
signalling = bri_cpe
channel => 1-2

dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 FromISDN it default In Service
2 FromISDN it default In Service

pri show spans
PRI span 1/0: Down, Active

module reload chan_dahdi.so
-- Reloading module 'chan_dahdi.so' (DAHDI Telephony Driver w/PRI)
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
== Parsing '/etc/asterisk/dahdi-channels.conf': == Found
[Aug 30 09:36:33] WARNING[1735]: chan_dahdi.c:18023 process_dahdi: Ignoring any changes to 'overlapdial' (on reload) at line 23.
[Aug 30 09:36:33] WARNING[1735]: chan_dahdi.c:18023 process_dahdi: Ignoring any changes to 'overlapdial' (on reload) at line 13.
[Aug 30 09:36:33] WARNING[1735]: chan_dahdi.c:18023 process_dahdi: Ignoring any changes to 'switchtype' (on reload) at line 14.
[Aug 30 09:36:33] WARNING[1735]: chan_dahdi.c:18023 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 15.
[Aug 30 09:36:33] WARNING[1735]: chan_dahdi.c:12747 mkintf: Attempt to configure channel 1 with signaling Unknown signalling -1 ignored because it is already configured to be ISDN PRI.
-- Reconfigured channel 1, ISDN PRI signalling
[Aug 30 09:36:33] WARNING[1735]: chan_dahdi.c:12747 mkintf: Attempt to configure channel 2 with signaling Unknown signalling -1 ignored because it is already configured to be ISDN PRI.
-- Reconfigured channel 2, ISDN PRI signalling

dmesg
vzaphfc: card 0: chan B1: TX FIFO has become empty
vzaphfc: card 0: chan B1 opened as ZTHFC1/0/1.
vzaphfc: card 0: chan B1 closed as ZTHFC1/0/1.
vzaphfc: card 0: chan B2: TX FIFO has become empty
vzaphfc: card 0: chan B2 opened as ZTHFC1/0/2.
vzaphfc: card 0: chan B2 closed as ZTHFC1/0/2.
vzaphfc: card 0: chan D opened as ZTHFC1/0/3.
vzaphfc: card 0: chan D closed as ZTHFC1/0/3.
vzaphfc: card 0: chan B1 opened as ZTHFC1/0/1.
vzaphfc: card 0: chan B2 opened as ZTHFC1/0/2.
vzaphfc: card 0: chan D opened as ZTHFC1/0/3.
vzaphfc: card 0: chan D: TX FIFO has become empty

the cable is crossed
B100 back lights are off
4 years 1 month ago #9051 by hua
Please login to view the answers
Time to create page: 0.037 seconds
Powered by Kunena Forum